Publications

Journals

2015

D. Dusthakar, A. Menzel and B. Svendsen
Comparison of phenomenological and laminate-based models for rate-dependent switching in ferroelectric continua
GAMM-Mitteilungen,
38, 1, 147-170, 2015

2014

T. Clausmeyer, A. Güner, A. Tekkaya, V. Levkovitch and B. Svendsen
Modeling and finite element simulation of loading-path-dependent hardening in sheet metals during forming
International Journal of Plasticity,
63, 64-93, 2014

2013

C. Barthel, B. Klusemann, R. Denzer and B. Svendsen
Modeling of a thermomechanical process chain for sheet steels
International Journal of Mechanical Sciences,
74, 46-54, 2013

2012

A. Güzel, A. Jäger, F. Parvizian, H. Lambers, A. Tekkaya, B. Svendsen and H. Maier
A new method for determining dynamic grain structure evolution during hot aluminum extrusion
Journal of Materials Processing Technology,
212, 1, 323-330, 2012

B. Klusemann, S. Bargmann and B. Svendsen
Two models for gradient inelasticity based on non-convex energy
Computational Materials Science,
64, 96-100, 2012

C. Barthel, B. Klusemann, R. Denzer, T. Clausmeyer and B. Svendsen
Modeling Induced Flow Anisotropy and Phase Transformations in Air Hardening Steels
Key Engineering Materials,
504-506, 443-448, 2012

T. Clausmeyer, G. Gerstein, S. Bargmann, B. Svendsen, A. van den Boogaard and B. Zillmann
Experimental characterization of microstructure development during loading path changes in bcc sheet steels
Journal of Materials Science,
48, 2, 674-689, 2012

2011

T. Bartel, A. Menzel and B. Svendsen
Thermodynamic and relaxation-based modeling of the interaction between martensitic phase transformations and plasticity
Journal of the Mechanics and Physics of Solids,
59, 5, 1004-1019, 2011

T. Clausmeyer, T. Boogaard, M. Noman, G. Gershteyn, M. Scharper, B. Svendsen and S. Bargmann
Phenomenological modeling of anisotropy induced by evolution of the dislocation structure on the macroscopic and microscopic scale
International Journal of Material Forming,
4, 2, 141-154, 2011

T. Wiederkehr, B. Klusemann, H. Müller and B. Svendsen
Fast, curvature-based prediction of rolling forces for porous media based on a series of detailed simulations
Advances in Engineering Software,
42, 4, 142-150, 2011

F. Parvizian, A. Güzel, A. Jäger, H. Lambers, B. Svendsen, A. Tekkaya and H. Maier
Modeling of dynamic microstructure evolution of EN AW-6082 alloy during hot forward extrusion
Computational Materials Science,
50, 4, 1520-1525, 2011

B. Klusemann, R. Denzer and B. Svendsen
Microstructure-Based Modeling of Residual Stresses in WC-12Co-Sprayed Coatings
Journal of Thermal Spray Technology,
21, 1, 96-107, 2011

S. Bargmann, B. Svendsen and M. Ekh
An extended crystal plasticity model for latent hardening in polycrystals
Computational Mechanics,
48, 6, 631-645, 2011

2010

S. Bargmann, M. Ekh, K. Runesson and B. Svendsen
Modeling of polycrystals with gradient crystal plasticity: A comparison of strategies
Philosophical Magazine,
90, 10, 1263-1288, 2010

M. Noman, T. Clausmeyer, C. Barthel, B. Svendsen, J. Huétink and M. van Riel
Experimental characterization and modeling of the hardening behavior of the sheet steel LH800
Materials Science and Engineering: A,
527, 10-11, 2515-2526, 2010

T. Wiederkehr, B. Klusemann, D. Gies, H. Müller and B. Svendsen
An image morphing method for 3D reconstruction and FE-analysis of pore networks in thermal spray coatings
Computational Materials Science,
47, 4, 881-889, 2010

T. Kayser, B. Klusemann, H. Lambers, H. Maier and B. Svendsen
Characterization of grain microstructure development in the aluminum alloy EN AW-6060 during extrusion
Materials Science and Engineering: A,
527, 24-25, 6568-6573, 2010

B. Svendsen and S. Bargmann
On the continuum thermodynamic rate variational formulation of models for extended crystal plasticity at large deformation
Journal of the Mechanics and Physics of Solids,
58, 9, 1253-1271, 2010

W. Tillmann, B. Klusemann, J. Nebel and B. Svendsen
Analysis of the Mechanical Properties of an Arc-Sprayed WC-FeCSiMn Coating: Nanoindentation and Simulation
Journal of Thermal Spray Technology,
20, 1-2, 328-335, 2010

F. Parvizian, A. Schneidt, B. Svendsen and R. Mahnken
Thermo-mechanically coupled modeling and simulation of hot metal-forming processes using adaptive remeshing method
GAMM-Mitteilungen,
33, 1, 95-115, 2010

B. Svendsen, B. Klusemann and C. Hortig
Lengthscale-dependent modelling of ductile failure in metallic microstructures
International Journal of Materials and Structural Integrity,
4, 2/3/4, 141, 2010

B. Klusemann and B. Svendsen
Homogenization methods for multi-phase elastic composites: Comparisons and Benchmarks
Technische Mechanik, 4, 374-386, 2010

S. Bargmann, M. Ekh, B. Svendsen and K. Runesson
Computational modeling of gradient hardening in polycrystals
Technische Mechanik, 30, 4, 316-323, 2010

T. Clausmeyer, M. Noman, S. Bargmann, B. Svendsen, V. Levkovitch, A. van den Boogaard, G. Gershteyn and F. Bach
Comparison of models for directional hardening in sheet metals
International Journal of Plasticity, 2010

B. Klusemann, B. Svendsen and H. Vehoff
Analysis of the deformation behavior of sheet metal mesocrystals in a crystal plasticity framework
Computational Materials Science, 2010

2009

F. Parvizian, T. Kayser and B. Svendsen
Modeling and Simulation of Microstructure Evolution in Extruded Aluminum Profiles
Key Engineering Materials,
424, 43-50, 2009

F. Parvizian, T. Kayser, C. Hortig and B. Svendsen
Thermomechanical modeling and simulation of aluminum alloy behavior during extrusion and cooling
Journal of Materials Processing Technology,
209, 2, 876-883, 2009

T. Bartel, A. Menzel and B. Svendsen
Enhanced Micromechanical Modelling of Martensitic Phase-Transitions Considering Plastic Deformations
EDP Sciences, ESOMAT 2009 - 8th European Symposium on Martensitic Transformations,
7, 2009

B. Svendsen, P. Neff and A. Menzel
On constitutive and configurational aspects of models for gradient continua with microstructure
ZAMM,
89, 8, 687-697, 2009

T. Clausmeyer, M. Noman and B. Svendsen
Comparison of two models for anisotropic hardening evolution in metals during complex loading
International Journal of Material Forming,
2, S1, 395-398, 2009

A. Menzel and B. Svendsen
Two configurational approaches on the modelling of continuum dislocation inelasticity
The International Journal of Structural Changes in Solids,
1, 1, 61-72, 2009

T. Clausmeyer, M. Noman and B. Svendsen
Advanced models for evolving anisotropy in sheet metals during loading
PAMM, 2009

J. Unger, R. Ostwald and B. Svendsen
Thermodynamic multifield modeling of electromagnetic metal forming
International Journal of Material Forming,
2, S1, 907-910, 2009

2008

T. Kayser, F. Parvizian, C. Hortig and B. Svendsen
Application of Adaptive Mesh and ALE Method in Simulation of Extrusion of Aluminum Alloys
Key Engineering Materials,
367, 117-123, 2008

F. Reusch, C. Hortig and B. Svendsen
Nonlocal Modeling and Simulation of Ductile Damage and Failure in Metal Matrix Composites
Journal of Engineering Materials and Technology,
130, 2, 021009, 2008

T. Cwiekala, A. Brosius, A. Tekkaya, O. Grydin, M. Schaper, F. Bach, C. Barthel and B. Svendsen
Efficient Modelling and Simulation of Process Chains in Sheet Metal Forming and Processing
Steel Research International, 731-737, 2008

2007

C. Hortig and B. Svendsen
Simulation of chip formation during high-speed cutting
Journal of Materials Processing Technology,
186, 1-3, 66-76, 2007

Proceedings

2016

D. Dusthakar, A. Menzel and B. Svendsen
A laminate-based framework for switching and microstructure evolution in polycrystalline ferroelectrics
PAMM,
16, 1, 323-324, 2016

2015

D. Dusthakar, A. Menzel and B. Svendsen
A laminate-based modelling approach for rate-dependent switching in ferroelectric materials
PAMM,
15, 1, 3-6, 2015

2014

D. Dusthakar, T. Bartel, B. Kiefer, A. Menzel and B. Svendsen
Rate-Dependent Laminate-Based Approach for Modelling of Ferroelectric Single Crystals
Proceedings of the 5th International Congress on Computational Mechanics and Simulation,
1324-1336, 2014

D. Dusthakar, A. Menzel and B. Svendsen
Laminate-based modelling of microstructure and switching in ferroelectrics
PAMM,
14, 1, 407-408, 2014

D. Dusthakar, A. Menzel and B. Svendsen
Free energy models for ferroelectric materials with application to rate-dependent switching
Proc. 2nd Seminar on The Mechanics of Multifunctional Materials (SMMM2), Bad Honnef, Germany,
11-13, 2014

2012

C. Barthel, B. Klusemann, R. Denzer, T. Clausmeyer and B. Svendsen
Modeling Induced Flow Anisotropy and Phase Transformations in Air Hardening Steels
Key Engineering Materials, Key Engineering Materials,
504-506, 443-448, 2012

2011

R. Holtermann, A. Menzel, C. Hortig and B. Svendsen
Towards the simulation of grinding processes - a thermoplastic single grain approach
PAMM,
11, 1, 385-386, 2011

T. Clausmeyer, S. Bargmann and B. Svendsen
Modeling of anisotropy induced by evolution of dislocation microstructures on different scales
AIP Conference Proceedings 1353, The 14th International ESAFORM Conference on Material Forming ESAFORM 2011, Belfast, Northern Ireland, The 14th International ESAFORM Conference on Material Forming: ESAFORM 2011. AIP Conference Proceedings,
1353, 121-126, 2011

B. Svendsen, S. Bargmann and B. Klusemann
Thermodynamic formulation of models for multiscale crystal plasticity at large deformation
Macro to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling, Proceedings of 17. International Symposium on Plasticity and its current Applications 2011, Ed.: A. Khan, 19-21, 2011

T. Clausmeyer, G. Gershteyn, S. Bargmann, B. Svendsen and M. Schaper
Modeling and characteriziation of the evolution of the dislocation structure during non-monotonic loading. Part 2: Modeling transient behavior
Macro to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling, Proceedings of 17. International Symposium on Plasticity and its current Applications 2011, Ed.: A. Khan, 172-174, 2011

G. Gershteyn, T. Clausmeyer, S. Bargmann, B. Svendsen and M. Schaper
Modeling and characteriziation of the evolution of the dislocation structure during non-monotonic loading. Part 1: Electron-microscopic analysis
Macro to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling, Proceedings of 17. International Symposium on Plasticity and its current Applications 2011, Ed.: A. Khan,, 163-165, 2011

S. Bargmann, B. Svendsen and D. Reddy
Nonlocal modeling and simulation of inelastic material behavior of polycrystals
CD-ROM Proceedings of 2nd African Conference on Computational Mechanics, Cape Town, South Africa, 2011

T. Clausmeyer, S. Bargmann and B. Svendsen
Modeling of anisotropy induced by evolution of dislocation microstructures on different scales
Proceedings of the 14th International ESAFORM Conference on Material Forming, AIP Conference Proceedings 1353, The 14th International ESAFORM Conference on Material Forming: ESAFORM 2011. AIP Conference Proceedings,
1353, 121-126, 2011

B. Klusemann, S. Bargmann and B. Svendsen
Modeling and numerical simulation of multiscale behavior in polycrystals via extended crystal plasticity
Proc. Appl. Math. Mech., PAMM,
11, 1, 531-532, 2011

2010

F. Parvizian, T. Kayser, B. Klusemann and B. Svendsen
Modelling and simulation of dynamic microstructure evolution of aluminium alloys during thermomechanically coupled extrusion process
International Journal of Material Forming,
3, S1, 363-366, 2010

B. Klusemann and B. Svendsen
Homogenization Approach Based on Laminates
PAMM,
10, 1, 419-420, 2010

V. Palnau, C. Hortig, B. Klusemann, T. Bartel, B. Svendsen and A. Menzel
Multiscale material modelling
1st International Conference on Product Property Prediction, Dortmund, Germany, 2010

J. Nebel, B. Klusemann, E. Vogli, W. Tillmann and B. Svendsen
Arc spraying of WC-FeCSiMn cored wires. Part 2: E-Module Measurement and Simulation
Thermal Spray (ITSC). Global Solutions for Future Applications. 03.-05.05.2010. Singapore, 2010

B. Klusemann, B. Svendsen and H. Vehoff
Application of crystal plasticity to modeling the deformation behavior of sheet metal mesocrystals
Proccedings of the 5th International Conference on Multiscale Material Modeling, 4-8.10 2010, Freiburg, Germany, 2010

S. Bargmann and B. Svendsen
Dislocation densities and size dependent deformation of polycrystals
Proceedings of 5. International Conference on Multiscale Materials Modelling, 2010

T. Clausmeyer, B. Klusemann, S. Bargmann and B. Svendsen
Investigation and modeling of the material behavior due to evolving dislocation microstructures in fcc and bcc metals
Proccedings of the 5th International Conference on Multiscale Material Modeling, 4. - 8 .10.2010 , Freiburg, Germany, 384-387, 2010

B. Svendsen and B. Klusemann
Modellierung und Simulation des Material- und Mikrostrukturverhaltens thermisch gespritzter Schichten
SFB 708 Berichtsband 2007-2010, 2010

2009

S. Bargmann, B. Svendsen, M. Ekh and K. Runesson
Computational modeling of inelastic polycrystals with internal lengthscales
ECCOMAS Conference on Computational Methods for Coupled Problems in Science and Engineering, Italy, 2009

B. Klusemann, C. Hortig and B. Svendsen
Modeling and simulation of the microstructural behaviour in thermal sprayed coatings
PAMM,
9, 1, 421-422, 2009

B. Klusemann, C. Hortig and B. Svendsen
Modeling and simulation of the heterogenous material behavior in thermal-sprayed coatings
2009

T. Kayser, F. Parvizian, B. Klusemann and B. Svendsen
Experimental and theoretical investigation of the microstructural evolution in aluminium alloys during extrusion
Computational Methods and Experiments in Materials Characterisation IV,
1, 209-216, 2009

A. Menzel and B. Svendsen
On Configurational Aspects of Finite Deformation Inelasticity: A Variational Approach Versus the Transformation of Balance of Momentum
IUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics,
17, 37-46, 2009

T. Bartel, A. Menzel and B. Svendsen
Enhanced Micromechanical Modelling of Martensitic Phase-Transitions Considering Plastic Deformations
8th European Symposium on Martensitic Transformations, ESOMAT 2009 - 8th European Symposium on Martensitic Transformations,
2009

M. Noman and B. Svendsen
Identification of an advanced hardening model for single phase steels
7th European LS-DYNA Conference, 2009

T. Clausmeyer, M. Noman and B. Svendsen
Comparison of two models for anisotropic hardening evolution in metals during complex loading
International Journal of Material Forming,
2, S1, 395-398, 2009

C. Barthel, T. Clausmeyer and B. Svendsen
Numerical investigation of draw bending and deep drawing taking into account cross hardening
Proceedings of the 7th European LS-Dyna conference, 14. - 15.5.2009, Salzburg, Austria, 2009

B. Klusemann, C. Hortig and B. Svendsen
Modellierung und Simulation des heterogenen Materialverhaltens in thermisch gespritzten Schichten
SFB 708 - 3. öffentliches Kolloquium, 2009

T. Clausmeyer, M. Noman and B. Svendsen
Advanced models for evolving anisotropy in sheet metals during loading
Proceedings of X International Conference on Computational Plasticity - Fundamentals and Applications, 2. - 4.9 2009, Barcelona, Spain, 2009

T. Clausmeyer, M. Noman and B. Svendsen
Formulation and application of models for anisotropic hardening in sheet metals subject to complex loading-path changes
PAMM,
9, 1, 329-330, 2009

2008

S. Bargmann, M. Ekh, K. Runesson and B. Svendsen
Towards computational modelling of grain size dependence in microstructure models of polycrystals
2008

B. Svendsen, C. Hortig and B. Klusemann
Physikalische Modellierung und Simulation des Material- und Strukturverhaltens thermisch gespritzter Schichten
SFB 708 - 2. öffentliches Kolloquium, 2008

C. Hortig, X. Gu and B. Svendsen
Features of an adaptive remeshing strategy in the context of deformation localization and high speed cutting
PAMM,
8, 1, 10287-10288, 2008

A. Tekkaya, A. Brosius, T. Cwiekala, F. Bach, O. Grydin, M. Schaper, B. Svendsen and C. Barthel
Zeiteffiziente Prozesskettenmodellierung und -berechnung in der Blechumformung und -verarbeitung
Tagungsband MEFORM, 2008

C. Barthel, B. Svendsen, V. Levkovitch and J. Wang
Comparison of two different models to account for induced flow anisotropy during complex loading processes
PAMM,
8, 1, 10405-10406, 2008

C. Barthel, V. Levkovitch and B. Svendsen
Modeling of sheet metal forming processes taking into account distortional hardening
International Journal of Material Forming,
1, S1, 105-108, 2008

C. Barthel and B. Svendsen
Parameter identification for the steel LH800 and its application to the simulation of draw-bending and deep-drawing
Proceedings of the 7th international Conference and Workshop on Numerical Simulation of 3D Sheet Interlaken, 2008

F. Bach, M. Schaper, O. Grydin, A. Tekkaya, A. Brosius, T. Cwiekala, B. Svendsen and C. Barthel
Efficient Modeling and Calculation of Sheet Metal Forming Using Steel LH800
steel research int. 79 (2008) Special Edition, Vol. 1, pp 99-105, 2008

T. Clausmeyer, V. Levkovitch and B. Svendsen
Finite element modeling of the effect of evolving flow and hardening anisotropy on the forming of complex-shaped parts
Proceedings of Advanced Technology of Plasticity, 7.-9.11.2008, Gyeongju, Korea, 2008

2007

C. Hortig and B. Svendsen
Adaptiv modeling and simulation of shear banding and high speed cutting
AIP Conference Proceedings,
907, 721-726, 2007

C. Barthel, V. Levkovitch and B. Svendsen
Modelling of a deep drawing process taking inot account induced flow anisotropy
Book of Abstracts, 2007