Sprungmarken

Servicenavigation

Hauptnavigation

Sie sind hier:

Hauptinhalt

Journals

Journals

2017-2013    2012-2008    2007-2003    2002-1998   all

2017

S. Thylander, A. Menzel, M. Ristinmaa
A non-affine electro-viscoelastic microsphere model for dielectric elastomers: Application to VHB 4910 based actuators
Journal of Intelligent Material Systems and Structures,
2017

Bjoern Kiefer, Tobias Waffenschmidt, Leon Sprave, Andreas Menzel
A gradient-enhanced damage model coupled to plasticity—multi-surface formulation and algorithmic concepts
International Journal of Damage Mechanics, International Journal of Damage Mechanics,
doi:10.1177/1056789516676306, 2017

Alexander Bartels, Jörn Mosler
Efficient variational constitutive updates for Allen–Cahn-type phase field theory coupled to continuum mechanics
Computer Methods in Applied Mechanics and Engineering, Computer Methods in Applied Mechanics and Engineering,
317, 55-83, 2017

Ali Javili, Paul Steinmann, Jörn Mosler
Micro-to-macro transition accounting for general imperfect interfaces
Computer Methods in Applied Mechanics and Engineering,
317, 274-317, 2017

Tobias Asmanoglo, Andreas Menzel
Fibre-reinforced composites with fibre-bending stiffness under azimuthal shear – Comparison of simulation results with analytical solutions
International Journal of Non-Linear Mechanics,
91, 128-139, 2017

Tobias Asmanoglo, Andreas Menzel
A multi-field finite element approach for the modelling of fibre-reinforced composites with fibre-bending stiffness
Computer Methods in Applied Mechanics and Engineering,
317, 1037-1067, 2017

César Polindara, Tobias Waffenschmidt, Andreas Menzel
A computational framework for modelling damage-induced softening in fibre-reinforced materials – Application to balloon angioplasty
International Journal of Solids and Structures,
118-119, 235-256, 2017

Ali Javili, Niels Saabye Ottosen, Matti Ristinmaa, Jörn Mosler
Aspects of interface elasticity theory
Mathematics and Mechanics of Solids,
108128651769904, 2017

Alexander Bartels, Jörn Mosler
On the numerical implementation of thermomechanically coupled distortional hardening International Journal of Plasticity
2017

Björn Kiefer, T. Furlan, Jörn Mosler
A Numerical Convergence Study Regarding Homogenization Assumptions in Phase Field Modeling International Journal for Numerical Methods in Engineering.
2017

Tobias Asmanoglo, Andreas Menzel
A finite deformation continuum modelling framework for curvature effects in fibre-reinforced nanocomposites
Journal of the Mechanics and Physics of Solids,
107, 411-432, 2017

Rolf Berthelsen, Ralf Denzer, Philip Oppermann, Andreas Menzel
Computational homogenisation for thermoviscoplasticity: application to thermally sprayed coatings
Computational Mechanics,
2017

2016

T. Bartel, M. Osman, A. Menzel
A phenomenological model for the simulation of functional fatigue in shape memory alloy wires
Meccanica,
52, 4-5, 973-988, 2016-01-01

T. Bartel, A. Menzel
Modelling and simulation of cyclic thermomechanical behaviour of NiTi wires using a weak discontinuity approach
Int. J. Fracture, accepted for publication, International Journal of Fracture,
202, 2, 281-293, 2016-01-01

Eliana Bortot, Ralf Denzer, Andreas Menzel, Massimiliano Gei
Analysis of viscoelastic soft dielectric elastomer generators operating in an electrical circuit
International Journal of Solids and Structures,
78-79, 205-215, 2016

Rolf Berthelsen, Dennis Tomath, Ralf Denzer, Andreas Menzel
Finite element simulation of coating-induced heat transfer: application to thermal spraying processes
Meccanica,
51, 2, 291-307, 2016

Emma Lejeune, Ali Javili, Christian Linder
An algorithmic approach to multi-layer wrinkling
Extreme Mechanics Letters,
7, 10-17, 2016

Emma Lejeune, Ali Javili, Christian Linder
Understanding geometric instabilities in thin films via a multi-layer model
Soft Matter, Soft Matter,
12, 3, 806-816, 2016

D. Gottschalk, A. McBride, B.D. Reddy, A. Javili, P. Wriggers, C.B. Hirschberger
Computational and theoretical aspects of a grain-boundary model that accounts for grain misorientation and grain-boundary orientation
Computational Materials Science,
111, 443-459, 2016

A. T. McBride, D. Gottschalk, B. D. Reddy, P. Wriggers, A. Javili
Computational and theoretical aspects of a grain-boundary model at finite deformations
Technische Mechanik, 36, 92–109, 2016

César Polindara, Tobias Waffenschmidt, Andreas Menzel
Simulation of balloon angioplasty in residually stressed blood vessels-Application of a gradient-enhanced fibre damage model.
Journal of Biomechanics, 49, 12, 2341-2348, 2016

Tobias Waffenschmidt, Myriam Cilla, Pablo Sáez, Marta M Pérez, Miguel A Martínez, Andreas Menzel, Estefanía Peña
Towards the modelling of ageing and atherosclerosis effects in ApoE(-/-) mice aortic tissue.
Journal of Biomechanics, 49, 12, 2390-2397, 2016

S Thylander, A Menzel, M Ristinmaa
Towards control of viscous effects in acrylic-based actuator applications
Smart Materials and Structures,
25, 9, 095034, 2016

K Haldar, B Kiefer, A Menzel
Finite element simulation of rate-dependent magneto-active polymer response
Smart Materials and Structures, accepted for publication,
25, 10, 104003, 2016

Rolf Berthelsen, Hendrik Wilbuer, Raphael Holtermann, Andreas Menzel
Computational modelling of wear - application to structured surfaces of elastoplastic tools
GAMM-Mitteilungen,
39, 2, 210-228, 2016

Noy Cohen, Andreas Menzel, Gal deBotton
Towards a physics-based multiscale modelling of the electro-mechanical coupling in electro-active polymers.
Proc Math Phys Eng Sci, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science,
472, 2186, 20150462, 2016

D. Biermann, R. Holtermann, A. Menzel, S. Schumann
Modelling and simulation of thermal effects in internal traverse grinding of hardened bearing steel.
CIRP Annals - Manufacturing Technology,
65, 1, 321-324, 2016

R. Holtermann, S. Schumann, A. Zabel, D. Biermann, A. Menzel
Numerical Determination of Process Values Influencing the Surface Integrity in Grinding.
Procedia CIRP,
45, 39-42, 2016

S. Maniprakash, A. Arockiarajan, A. Menzel
A multi-surface model for ferroelectric ceramics - application to cyclic electric loading with changing maximum amplitude.
Philosophical Magazine,
96, 13, 1263-1284, 2016

S. Maniprakash, R. Jayendiran, A. Menzel, A. Arockiarajan
Experimental investigation, modelling and simulation of rate-dependent response of 1–3 ferroelectric composites.
Mechanics of Materials,
94, 91-105, 2016

M. Canadija, J. Mosler
A variational formulation for thermomechanically coupled low cycle fatigue at finite strains
International Journal of Solids and Structures,
100-101, 388-398, 2016

Niels Saabye Ottosen, Matti Ristinmaa, Jörn Mosler
Framework for non-coherent interface models at finite displacement jumps and finite strains
Journal of the Mechanics and Physics of Solids,
90, 124-141, 2016

Tim Heitbreder, Niels Saabye Ottosen, Matti Ristinmaa, Jörn Mosler
Consistent elastoplastic cohesive zone model at finite deformations – Variational formulation
International Journal of Solids and Structures,
106-107, 284-293, 2016

Sara Thylander
Microsphere-based modeling of electro-active polymers
119, 2016

Till Clausmeyer
Evolution of plastic anisotropy in metals: Material models, experiments and applications
2016

2015

J. Kaliappan, A. Menzel
Modelling of non-linear switching effects in piezoceramics: a three-dimensional polygonal finite-element-based approach applied to oligo-crystals
Journal of Intelligent Material Systems and Structures,
26, 17, 2322-2337, 2015

C. Valero, E. Javierre, J. M. García-Aznar, A. Menzel, M. J. Gómez-Benito
Challenges in the Modeling of Wound Healing Mechanisms in Soft Biological Tissues
Ann Biomed Eng, Annals of Biomedical Engineering,
43, 7, 1654-1665, 2015

T. Bartel, B. Kiefer, K. Buckmann, A. Menzel
A kinematically-enhanced relaxation scheme for the modeling of displacive phase transformations
Journal of Intelligent Material Systems and Structures,
26, 6, 701-717, 2015

Tobias Waffenschmidt, César Polindara, Andreas Menzel
A Gradient-Enhanced Continuum Damage Model for Residually Stressed Fibre-Reinforced Materials at Finite Strains
Biomedical Technology,
74, 19-40, 2015

Richard Ostwald, Thorsten Bartel, Andreas Menzel
An energy-barrier-based computational micro-sphere model for phase-transformations interacting with plasticity
Computer Methods in Applied Mechanics and Engineering,
293, 232-265, 2015

Edwin A. Peraza Hernandez, Bjoern Kiefer, Darren J. Hartl, Andreas Menzel, Dimitris C. Lagoudas
Analytical investigation of structurally stable configurations in shape memory alloy-actuated plates
International Journal of Solids and Structures,
69-70, 442-458, 2015

Björn Kiefer, Karsten Buckmann, Thorsten Bartel
Numerical energy relaxation to model microstructure evolution in functional magnetic materials
GAMM-Mitteilungen,
38, 1, 171-196, 2015

Dinesh Kumar Dusthakar, Andreas Menzel, Bob Svendsen
Comparison of phenomenological and laminate-based models for rate-dependent switching in ferroelectric continua
GAMM-Mitteilungen,
38, 1, 147-170, 2015

Anna Ask, Andreas Menzel, Matti Ristinmaa
Modelling of Viscoelastic Dielectric Elastomers with Deformation Dependent Electric Properties
Procedia IUTAM,
12, 134-144, 2015

J. Schröder, M. Labusch, M.-A. Keip, B. Kiefer, D. Brands, D. C. Lupascu
Computation of non-linear magneto-electric product properties of 0-3 composites
GAMM-Mitteilungen,
38, 1, 8-24, 2015

Bhargav Potdar, Stéphane Graff, Björn Kiefer
Numerical Analysis and Experimental Validation of the Thermo-Mechanical Flow Behaviour of the Hot Stamping Steel MBW® 1500
Key Engineering Materials,
639, 213-220, 2015

C. Valero, E. Javierre, J. M. García-Aznar, M. J. Gómez-Benito, A. Menzel
Modeling of anisotropic wound healing
Journal of the Mechanics and Physics of Solids,
79, 80-91, 2015

Raphael Holtermann, Andreas Menzel, Sebastian Schumann, Dirk Biermann, Tobias Siebrecht, Petra Kersting
Modelling and simulation of Internal Traverse Grinding: bridging meso- and macro-scale simulations
Prod. Eng. Res. Devel., 9, 451-463, 2015

Niels Saabye Ottosen, Matti Ristinmaa, Jörn Mosler
Fundamental physical principles and cohesive zone models at finite displacements – Limitations and possibilities
International Journal of Solids and Structures,
53, 70-79, 2015

A. Bartels, T. Bartel, M. Canadija, J. Mosler
On the thermomechanical coupling in dissipative materials: A variational approach for generalized standard materials
Journal of the Mechanics and Physics of Solids,
82, 218-234, 2015

Volker Schulze, Eckart Uhlmann, Rolf Mahnken, Andreas Menzel, Dirk Biermann, Andreas Zabel, Patrick Bollig, Ivan M. Ivanov, Chun Cheng, Raphael Holtermann, Thorsten Bartel
Evaluation of different approaches for modeling phase transformations in machining simulation
Prod. Eng. Res. Devel., 9, 437-449, 2015

S. Schumann, T. Siebrecht, P. Kersting, D. Biermann, R. Holtermann, A. Menzel
Determination of the Thermal Load Distribution in Internal Traverse Grinding using a Geometric-Kinematic Simulation
Procedia CIRP,
31, 322-327, 2015

Efim Borukhovich, Philipp S. Engels, Jörn Mosler, Oleg Shchyglo, Ingo Steinbach
Large deformation framework for phase-field simulations at the mesoscale
Computational Materials Science,
108, 367-373, 2015

2014

Ralf Denzer, Andreas Menzel
Configurational forces for quasi-incompressible large strain electro-viscoelasticity – Application to fracture mechanics
European Journal of Mechanics - A/Solids,
48, 3-15, 2014

Rolf Berthelsen, Thomas Wiederkehr, Ralf Denzer, Andreas Menzel, Heinrich Müller
Efficient Simulation of Nonlinear Heat Transfer during Thermal Spraying of Complex Workpieces
World Journal of Mechanics,
04, 09, 289-301, 2014

S. Stupkiewicz, R. Denzer, A. Piccolroaz, D. Bigoni
Implicit yield function formulation for granular and rock-like materials
Computational Mechanics,
54, 5, 1163-1173, 2014

Serdar Göktepe, Andreas Menzel, Ellen Kuhl
The generalized Hill model: A kinematic approach towards active muscle contraction
J Mech Phys Solids, Journal of the Mechanics and Physics of Solids,
72, 20-39, 2014

Richard Ostwald, Thorsten Bartel, Andreas Menzel
A Gibbs-energy-barrier-based computational micro-sphere model for the simulation of martensitic phase-transformations
International Journal for Numerical Methods in Engineering,
97, 12, 851-877, 2014

Tobias Waffenschmidt, Andreas Menzel
Extremal states of energy of a double-layered thick-walled tube – Application to residually stressed arteries
J Mech Behav Biomed Mater, Journal of the Mechanical Behavior of Biomedical Materials,
29, 635-654, 2014

Tobias Waffenschmidt, César Polindara, Andreas Menzel, Sergio Blanco
A gradient-enhanced large-deformation continuum damage model for fibre-reinforced materials
Computer Methods in Applied Mechanics and Engineering,
268, 801-842, 2014

Richard Ostwald, Marcel Tiffe, Thorsten Bartel, Andreas Zabel, Andreas Menzel, Dirk Biermann
Towards the multi-scale simulation of martensitic phase-transformations: An efficient post-processing approach applied to turning processes
Journal of Materials Processing Technology,
214, 8, 1516-1523, 2014

T. Clausmeyer, A. Güner, A. E. Tekkaya, V. Levkovitch, B. Svendsen
Modeling and finite element simulation of loading-path-dependent hardening in sheet metals during forming
International Journal of Plasticity,
63, 64-93, 2014

J. Mosler, O. Shchyglo, H. Montazer Hojjat
A novel homogenization method for phase field approaches based on partial rank-one relaxation
Journal of the Mechanics and Physics of Solids,
68, 251-266, 2014

Baodong Shi, Alexander Bartels, Jörn Mosler
On the thermodynamically consistent modeling of distortional hardening: A novel generalized framework
International Journal of Plasticity,
63, 170-182, 2014

2013

Anna Ask, Ralf Denzer, Andreas Menzel, Matti Ristinmaa
Inverse-motion-based form finding for quasi-incompressible finite electroelasticity
International Journal for Numerical Methods in Engineering,
94, 6, 554-572, 2013

C. Barthel, B. Klusemann, R. Denzer, B. Svendsen
Modeling of a thermomechanical process chain for sheet steels
International Journal of Mechanical Sciences,
74, 46-54, 2013

E. Husser, T. Clausmeyer, G. Gershteyn, S. Bargmann
Determination of average dislocation densities in metals by analysis of digitally processed transmission-electron microscopy images
Materialwissenschaft und Werkstofftechnik,
44, 6, 541-546, 2013

Chetan Shivaputra Jarali, Somaraddi R. Basavaraddi, Björn Kiefer, Sharanabasava C. Pilli, Y. Charles Lu
Modeling of the Effective Elastic Properties of Multifunctional Carbon Nanocomposites Due to Agglomeration of Straight Circular Carbon Nanotubes in a Polymer Matrix
Journal of Applied Mechanics,
81, 2, 021010, 2013

I. Scheider, Y. Chen, A. Hinz, N. Huber, J. Mosler
Size effects in short fibre reinforced composites
Engineering Fracture Mechanics,
100, 17-27, 2013

N. Bleier, J. Mosler
A hybrid variationally consistent homogenization approach based on Ritz's method
International Journal for Numerical Methods in Engineering,
94, 7, 625-647, 2013

Baodong Shi, Jörn Mosler
On the macroscopic description of yield surface evolution by means of distortional hardening models: Application to magnesium
International Journal of Plasticity,
44, 1-22, 2013

Raphael Holtermann, Sebastian Schumann, Andreas Menzel, Dirk Biermann
Modelling, simulation and experimental investigation of chip formation in internal traverse grinding
Production Engineering,
7, 2-3, 251-263, 2013

M. Nebebe Mekonen, D. Steglich, J. Bohlen, L. Stutz, D. Letzig, J. Mosler
Experimental and numerical investigation of Mg alloy sheet formability
Materials Science and Engineering: A,
586, 204-214, 2013

I. Scheider, T. Xiao, N. Huber, J. Mosler
On the interaction between different size effects in fibre reinforced PMMA: Towards composites with optimised fracture behaviour
Computational Materials Science,
80, 35-42, 2013

Anna Ask
Modeling and simulation of electro-viscoelastic polymers
136, 2013

2012

A. Güzel, A. Jäger, F. Parvizian, H.-G. Lambers, A. E. Tekkaya, B. Svendsen, H. J. Maier
A new method for determining dynamic grain structure evolution during hot aluminum extrusion
Journal of Materials Processing Technology,
212, 1, 323-330, 2012

Anna Ask, Andreas Menzel, Matti Ristinmaa
Electrostriction in electro-viscoelastic polymers
Mechanics of Materials,
50, 9-21, 2012

Anna Ask, Andreas Menzel, Matti Ristinmaa
Phenomenological modeling of viscous electrostrictive polymers
International Journal of Non-Linear Mechanics,
47, 2, 156-165, 2012

Swantje Bargmann, Hakime Seddik, Ralf Greve
Computational modeling of flow-induced anisotropy of polar ice for the EDML deep drilling site, Antarctica: The effect of rotation recrystallization and grain boundary migration
International Journal for Numerical and Analytical Methods in Geomechanics,
36, 7, 892-917, 2012

Thorsten Bartel, Andreas Menzel
Partially relaxed energy potentials for the modelling of microstructures - application to shape memory alloys
GAMM-Mitteilungen,
35, 1, 59-74, 2012

P. Steinmann, A.T. McBride, S. Bargmann, A. Javili
A deformational and configurational framework for geometrically non-linear continuum thermomechanics coupled to diffusion
International Journal of Non-Linear Mechanics,
47, 2, 215-227, 2012

Tobias Waffenschmidt, Andreas Menzel, Ellen Kuhl
Anisotropic density growth of bone—A computational micro-sphere approach
International Journal of Solids and Structures,
49, 14, 1928-1946, 2012

Tobias Waffenschmidt, Andreas Menzel
Application of an anisotropic growth and remodelling formulation to computational structural design
Mechanics Research Communications,
42, 77-86, 2012

Richard Ostwald, Thorsten Bartel, Andreas Menzel
Phase-transformations interacting with plasticity – A micro-sphere model applied to TRIP steel
Computational Materials Science,
64, 12-16, 2012

Kaliappan Jayabal, Andreas Menzel
Voronoi-based three-dimensional polygonal finite elements for electromechanical problems
Computational Materials Science,
64, 66-70, 2012

Sara Thylander, Andreas Menzel, Matti Ristinmaa
An electromechanically coupled micro-sphere framework: application to the finite element analysis of electrostrictive polymers
Smart Materials and Structures,
21, 9, 094008, 2012

B. Kiefer, T. Bartel, A. Menzel
Implementation of numerical integration schemes for the simulation of magnetic SMA constitutive response
Smart Materials and Structures,
21, 9, 094007, 2012

Andreas Menzel, Ellen Kuhl
Frontiers in growth and remodeling
Mech Res Commun, Mechanics Research Communications,
42, 1-14, 2012

Benjamin Klusemann, Swantje Bargmann, Bob Svendsen
Two models for gradient inelasticity based on non-convex energy
Computational Materials Science,
64, 96-100, 2012

Clemens Barthel, Benjamin Klusemann, Ralf Denzer, Till Clausmeyer, Bob Svendsen
Modeling Induced Flow Anisotropy and Phase Transformations in Air Hardening Steels
Key Engineering Materials,
504-506, 443-448, 2012

T. Clausmeyer, G. Gerstein, S. Bargmann, B. Svendsen, A. H. van den Boogaard, B. Zillmann
Experimental characterization of microstructure development during loading path changes in bcc sheet steels
Journal of Materials Science,
48, 2, 674-689, 2012

Nikolaus Bleier, Jörn Mosler
Efficient variational constitutive updates by means of a novel parameterization of the flow rule
International Journal for Numerical Methods in Engineering,
89, 9, 1120-1143, 2012

Malek Homayonifar, Jörn Mosler
Efficient modeling of microstructure evolution in magnesium by energy minimization
International Journal of Plasticity,
28, 1, 1-20, 2012

S. Khan, O. Kintzel, J. Mosler
Experimental and numerical lifetime assessment of Al 2024 sheet
International Journal of Fatigue,
37, 112-122, 2012

S. Khan, F. Wilde, F. Beckmann, J. Mosler
Low cycle fatigue damage mechanism of the lightweight alloy Al2024
International Journal of Fatigue,
38, 92-99, 2012

M. Nebebe Mekonen, D. Steglich, J. Bohlen, D. Letzig, J. Mosler
Mechanical characterization and constitutive modeling of Mg alloy sheets
Materials Science and Engineering: A,
540, 174-186, 2012

J. Mosler, M. Homayonifar
Variational constitutive updates for microstructure evolution in hcp metals
GAMM-Mitteilungen,
35, 1, 43-58, 2012

A. McBride, J. Mergheim, A. Javili, P. Steinmann, S. Bargmann
Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch
Journal of the Mechanics and Physics of Solids,
60, 6, 1221-1239, 2012

2011

T. Bartel, A. Menzel, B. Svendsen
Thermodynamic and relaxation-based modeling of the interaction between martensitic phase transformations and plasticity
Journal of the Mechanics and Physics of Solids,
59, 5, 1004-1019, 2011

Till Clausmeyer, Ton van den Boogaard, Muhammad Noman, Grygoriy Gershteyn, Mirko Scharper, Bob Svendsen, Swantje Bargmann
Phenomenological modeling of anisotropy induced by evolution of the dislocation structure on the macroscopic and microscopic scale
International Journal of Material Forming,
4, 2, 141-154, 2011

T. Wiederkehr, B. Klusemann, H. Müller, B. Svendsen
Fast, curvature-based prediction of rolling forces for porous media based on a series of detailed simulations
Advances in Engineering Software,
42, 4, 142-150, 2011

K. Jayabal, A. Menzel, A. Arockiarajan, S. M. Srinivasan
Micromechanical modelling of switching phenomena in polycrystalline piezoceramics: application of a polygonal finite element approach
Computational Mechanics,
48, 4, 421-435, 2011

Magnus Ekh, Swantje Bargmann, Mikkel Grymer
Influence of grain boundary conditions on modeling of size-dependence in polycrystals
Acta Mechanica,
218, 1-2, 103-113, 2011

F. Parvizian, A. Güzel, A. Jäger, H.-G. Lambers, B. Svendsen, A. E. Tekkaya, H. J. Maier
Modeling of dynamic microstructure evolution of EN AW-6082 alloy during hot forward extrusion
Computational Materials Science,
50, 4, 1520-1525, 2011

B. Klusemann, R. Denzer, B. Svendsen
Microstructure-Based Modeling of Residual Stresses in WC-12Co-Sprayed Coatings
Journal of Thermal Spray Technology,
21, 1, 96-107, 2011

S. Bargmann, P. M. Jordan
A second-sound based, hyperbolic SIR model for high-diffusivity spread
Physics Letters A,
375, 5, 898-907, 2011

Swantje Bargmann, B. Daya Reddy
Modeling of polycrystals using a gradient crystal plasticity theory that includes dissipative micro-stresses
European Journal of Mechanics - A/Solids,
30, 5, 719-730, 2011

S. Bargmann, A. T. McBride, P. Steinmann
Models of Solvent Penetration in Glassy Polymers With an Emphasis on Case II Diffusion. A Comparative Review
Applied Mechanics Reviews,
64, 1, 010803, 2011

R. Ostwald, T. Bartel, A. Menzel
A one-dimensional computational model for the interaction of phase-transformations and plasticity
Int. J. of Structural Changes in Solids, 3, 63-82, 2011

K. Jayabal, A. Menzel
Application of the polygonal finite elements to two-dimensional mechanical and electro-mechanically coupled problems
Computer Modeling in Engineering & Sciences, 73, 183-208, 2011

C. Miehe, D. Rosato, B. Kiefer
Variational principles in dissipative electro-magneto-mechanics: A framework for the macro-modeling of functional materials
International Journal for Numerical Methods in Engineering,
86, 10, 1225-1276, 2011

Swantje Bargmann, Bob Svendsen, Magnus Ekh
An extended crystal plasticity model for latent hardening in polycrystals
Computational Mechanics,
48, 6, 631-645, 2011

A.T. McBride, A. Javili, P. Steinmann, S. Bargmann
Geometrically nonlinear continuum thermomechanics with surface energies coupled to diffusion
Journal of the Mechanics and Physics of Solids,
59, 10, 2116-2133, 2011

D. Biermann, A. Menzel, T. Bartel, F. Höhne, R. Holtermann, R. Ostwald, B. Sieben, M. Tiffe, A. Zabel
Experimental and Computational Investigation of Machining Processes for Functionally Graded Materials
Procedia Engineering,
19, 22-27, 2011

Chetan S. Jarali, S. Raja, Björn Kiefer
Modeling the effective properties and thermomechanical behavior of SMA-SMP multifunctional composite laminates
Polymer Composites,
32, 6, 910-927, 2011

Christian Miehe, Björn Kiefer, Daniele Rosato
An incremental variational formulation of dissipative magnetostriction at the macroscopic continuum level
International Journal of Solids and Structures,
48, 13, 1846-1866, 2011

O. Kintzel, J. Mosler
An incremental minimization principle suitable for the analysis of low cycle fatigue in metals: A coupled ductile–brittle damage model
Computer Methods in Applied Mechanics and Engineering,
200, 45-46, 3127-3138, 2011

Radan Radulovic, Otto T. Bruhns, Jörn Mosler
Effective 3D failure simulations by combining the advantages of embedded Strong Discontinuity Approaches and classical interface elements
Engineering Fracture Mechanics,
78, 12, 2470-2485, 2011

Alexander Arnold, Otto T. Bruhns, Jörn Mosler
An efficient algorithm for the inverse problem in elasticity imaging by means of variational r-adaption
Phys Med Biol, Physics in Medicine and Biology,
56, 14, 4239-4265, 2011

J. Mosler, I. Scheider
A thermodynamically and variationally consistent class of damage-type cohesive models
Journal of the Mechanics and Physics of Solids,
59, 8, 1647-1668, 2011

J. Mosler, L. Stanković, R. Radulović
Efficient modeling of localized material failure by means of a variationally consistent embedded strong discontinuity approach
International Journal for Numerical Methods in Engineering,
88, 10, 1008-1041, 2011

M. Canadija, J. Mosler
On the thermomechanical coupling in finite strain plasticity theory with non-linear kinematic hardening by means of incremental energy minimization
International Journal of Solids and Structures,
48, 7-8, 1120-1129, 2011

M. Homayonifar, J. Mosler
On the coupling of plastic slip and deformation-induced twinning in magnesium: A variationally consistent approach based on energy minimization
International Journal of Plasticity,
27, 7, 983-1003, 2011

A. Gajo, R. Denzer
Finite element modelling of saturated porous media at finite strains under dynamic conditions with compressible constituents
International Journal for Numerical Methods in Engineering,
85, 13, 1705-1736, 2011

Richard Ostwald, Thorsten Bartel, Andreas Menzel
Interaction of phase-transformations and plasticity - a multi-phase micro-sphere approach
PAMM,
11, 1, 417-418, 2011

Andrew T. McBride, Swantje Bargmann, Paul Steinmann
Geometrically Nonlinear Continuum Thermomechanics Coupled to Diffusion: A Framework for Case II Diffusion
Advances in Extended and Multifield Theories for Continua,
59, 89-107, 2011

S. Bargmann, A. T. McBride, P. Steinmann
Computational modeling of case II diffusion in polymeric materials
Accepted for publication in Proceedings of the 24th Nordic Seminar on Computational Mechanics, Helsinki, Finland, 2011

2010

Swantje Bargmann, Magnus Ekh, Kenneth Runesson, Bob Svendsen
Modeling of polycrystals with gradient crystal plasticity: A comparison of strategies
Philosophical Magazine,
90, 10, 1263-1288, 2010

M. Noman, T. Clausmeyer, C. Barthel, B. Svendsen, J. Huétink, M. van Riel
Experimental characterization and modeling of the hardening behavior of the sheet steel LH800
Materials Science and Engineering: A,
527, 10-11, 2515-2526, 2010

R. Ostwald, T. Bartel, A. Menzel
A computational micro-sphere model applied to the simulation of phase-transformations
ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik,
90, 7-8, 605-622, 2010

T. Wiederkehr, B. Klusemann, D. Gies, H. Müller, B. Svendsen
An image morphing method for 3D reconstruction and FE-analysis of pore networks in thermal spray coatings
Computational Materials Science,
47, 4, 881-889, 2010

T. Kayser, B. Klusemann, H.-G. Lambers, H. J. Maier, B. Svendsen
Characterization of grain microstructure development in the aluminum alloy EN AW-6060 during extrusion
Materials Science and Engineering: A,
527, 24-25, 6568-6573, 2010

Bob Svendsen, Swantje Bargmann
On the continuum thermodynamic rate variational formulation of models for extended crystal plasticity at large deformation
Journal of the Mechanics and Physics of Solids,
58, 9, 1253-1271, 2010

W. Tillmann, B. Klusemann, J. Nebel, B. Svendsen
Analysis of the Mechanical Properties of an Arc-Sprayed WC-FeCSiMn Coating: Nanoindentation and Simulation
Journal of Thermal Spray Technology,
20, 1-2, 328-335, 2010

F. Parvizian, A. Schneidt, B. Svendsen, R. Mahnken
Thermo-mechanically coupled modeling and simulation of hot metal-forming processes using adaptive remeshing method
GAMM-Mitteilungen,
33, 1, 95-115, 2010

Bob Svendsen, Benjamin Klusemann, Christian Hortig
Lengthscale-dependent modelling of ductile failure in metallic microstructures
International Journal of Materials and Structural Integrity,
4, 2/3/4, 141, 2010

P. Pavankumar, K. Jayabal, A. Arockiarajan
A Comparative Study Between Finite Element and Polygonal Finite Element Approaches for Electromechanical Coupled Linear Problems
Integrated Ferroelectrics,
120, 1, 90-101, 2010

A. Ask, A. Menzel, M. Ristinmaa
On the modelling of electro-viscoelastic response of electrostrictive polyurethane elastomers
IOP Conference Series: Materials Science and Engineering,
10, 012101, 2010

E. Kuhl, A. Menzel, K. Garikipati
On the convexity of transversely isotropic chain network models†
Philosophical Magazine,
86, 21-22, 3241-3258, 2010

T. Bartel, K. Hackl
Multiscale modeling of martensitic phase transformations: On the numerical determination of heterogeneous mesostructures within shape-memory alloys induced by precipitates
Technische Mechanik, 30, 324-342, 2010

B. Klusemann, B. Svendsen
Homogenization methods for multi-phase elastic composites: Comparisons and Benchmarks
Technische Mechanik, 4, 374-386, 2010

S. Bargmann, M. Ekh, B. Svendsen, K. Runesson
Computational modeling of gradient hardening in polycrystals
Technische Mechanik, 30, 4, 316-323, 2010

T. Clausmeyer, M. Noman, S. Bargmann, B. Svendsen, V. Levkovitch, A. H. van den Boogaard, G. Gershteyn, Fr.-W. Bach
Comparison of models for directional hardening in sheet metals
International Journal of Plasticity, 2010

B. Klusemann, B. Svendsen, H. Vehoff
Analysis of the deformation behavior of sheet metal mesocrystals in a crystal plasticity framework
Computational Materials Science, 2010

O. Kintzel, S. Khan, J. Mosler
A novel isotropic quasi-brittle damage model applied to LCF analyses of Al2024
International Journal of Fatigue,
32, 12, 1948-1959, 2010

J. Mosler
Variationally consistent modeling of finite strain plasticity theory with non-linear kinematic hardening
Computer Methods in Applied Mechanics and Engineering,
199, 45-48, 2753-2764, 2010

Alexander Arnold, Stefan Reichling, Otto T. Bruhns, Jörn Mosler
Efficient computation of the elastography inverse problem by combining variational mesh adaption and a clustering technique
Phys Med Biol, Physics in Medicine and Biology,
55, 7, 2035-2056, 2010

J. Mosler, O. T. Bruhns
On the implementation of rate-independent standard dissipative solids at finite strain – Variational constitutive updates
Computer Methods in Applied Mechanics and Engineering,
199, 9-12, 417-429, 2010

J. Mosler, O. T. Bruhns
On the Implementation of Variational Constitutive Updates at Finite Strains
IUTAM Symposium on Variational Concepts with Applications to the Mechanics of Materials,
21, 199-208, 2010

S. Khan, A. Vyshnevskyy, J. Mosler
Low cycle lifetime assessment of Al2024 alloy
International Journal of Fatigue,
32, 8, 1270-1277, 2010

M. Homayonifar, J. Mosler
Characterization of micro-mechanical deformation systems of magnesium based on energy minimization
Technische Mechanik,
30, 1-3, 146-156, 2010

O. Kintzel, J. Mosler
A coupled isotropic elasto-plastic damage model based on incremental minimization principles
Technische Mechanik,
30, 1-3, 177-184, 2010

J. Mosler
On variational updates for non-associative kinematic hardening of Armstrong-Frederick-type
Technische Mechanik,
30, 1-3, 244-251, 2010

2009

A. Menzel, T. Waffenschmidt
A microsphere-based remodelling formulation for anisotropic biological tissues
Philos Trans A Math Phys Eng Sci, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences,
367, 1902, 3499-3523, 2009

Farhad Parvizian, T. Kayser, Bob Svendsen
Modeling and Simulation of Microstructure Evolution in Extruded Aluminum Profiles
Key Engineering Materials,
424, 43-50, 2009

F. Parvizian, T. Kayser, C. Hortig, B. Svendsen
Thermomechanical modeling and simulation of aluminum alloy behavior during extrusion and cooling
Journal of Materials Processing Technology,
209, 2, 876-883, 2009

Swantje Bargmann, Ralf Denzer, Paul Steinmann
Material Forces in Non-Classical Thermo-Hyperelasticity
Journal of Thermal Stresses,
32, 4, 361-393, 2009

T. Bartel, K. Hackl
A micromechanical model for martensitic phase-transformations in shape-memory alloys based on energy-relaxation
ZAMM,
89, 10, 792-809, 2009

Thorsten Bartel, Andreas Menzel, Bob Svendsen
Enhanced Micromechanical Modelling of Martensitic Phase-Transitions Considering Plastic Deformations
EDP Sciences, ESOMAT 2009 - 8th European Symposium on Martensitic Transformations,
7, 2009

V. Alastrué, M. A. Martínez, M. Doblaré, A. Menzel
Anisotropic micro-sphere-based finite elasticity applied to blood vessel modelling
Journal of the Mechanics and Physics of Solids,
57, 1, 178-203, 2009

V. Alastrué, M. A. Martínez, A. Menzel, M. Doblaré
On the use of non-linear transformations for the evaluation of anisotropic rotationally symmetric directional integrals. Application to the stress analysis in fibred soft tissues
International Journal for Numerical Methods in Engineering,
79, 4, 474-504, 2009

B. Svendsen, P. Neff, A. Menzel
On constitutive and configurational aspects of models for gradient continua with microstructure
ZAMM,
89, 8, 687-697, 2009

Magnus Harrysson, Matti Ristinmaa, Mathias Wallin, Andreas Menzel
Framework for deformation induced anisotropy in glassy polymers
Acta Mechanica,
211, 3-4, 195-213, 2009

K. Jayabal, A. Arockiarajan, S. M. Sivakumar
Multiaxial behavior of ferroelectric single and polycrystals with pressure dependent boundary effects
Computational Materials Science,
44, 4, 1222-1230, 2009

K. Jayabal, D. Srikrishna, T. S. Abhinandan, A. Arockiarajan, S. M. Srinivasan
A thermodynamically consistent model with evolving domain structures in ferroelectrics
International Journal of Engineering Science,
47, 10, 1014-1024, 2009

M. Scherer, R. Denzer, P. Steinmann
A fictitious energy approach for shape optimization
International Journal for Numerical Methods in Engineering,
n/a-n/a, 2009

P. Steinmann, M. Scherer, R. Denzer
Secret and joy of configurational mechanics: From foundations in continuum mechanics to applications in computational mechanics
ZAMM,
89, 8, 614-630, 2009

T. Clausmeyer, M. Noman, B. Svendsen
Comparison of two models for anisotropic hardening evolution in metals during complex loading
International Journal of Material Forming,
2, S1, 395-398, 2009

A. Menzel, B. Svendsen
Two configurational approaches on the modelling of continuum dislocation inelasticity
The International Journal of Structural Changes in Solids,
1, 1, 61-72, 2009

K. Jayabal, S. M. Sivakumar
Model for Piezoceramics
Encyclopedia of Structural Health Monitoring, John Wiley & Sons, 2009

T. Clausmeyer, M. Noman, B. Svendsen
Advanced models for evolving anisotropy in sheet metals during loading
PAMM, 2009

J. Mosler, O. T. Bruhns
Towards variational constitutive updates for non-associative plasticity models at finite strain: Models based on a volumetric-deviatoric split
International Journal of Solids and Structures,
46, 7-8, 1676-1684, 2009

Jörn Mosler, Fehmi Cirak
A variational formulation for finite deformation wrinkling analysis of inelastic membranes
Computer Methods in Applied Mechanics and Engineering,
198, 27-29, 2087-2098, 2009

J. Mosler, M. Ortiz
An error-estimate-free and remapping-free variational mesh refinement and coarsening method for dissipative solids at finite strains
International Journal for Numerical Methods in Engineering,
77, 3, 437-450, 2009

J. Unger, R. Ostwald, B. Svendsen
Thermodynamic multifield modeling of electromagnetic metal forming
International Journal of Material Forming,
2, S1, 907-910, 2009

Jörn Mosler
A Variationally Consistent Approach for Crack Propagation Based on Configurational Forces
IUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics,
17, 239-247, 2009

2008

T. Kayser, F. Parvizian, C. Hortig, B. Svendsen
Application of Adaptive Mesh and ALE Method in Simulation of Extrusion of Aluminum Alloys
Key Engineering Materials,
367, 117-123, 2008

S. Bargmann, P. Steinmann, P. M. Jordan
On the propagation of second-sound in linear and nonlinear media: Results from Green–Naghdi theory
Physics Letters A,
372, 24, 4418-4424, 2008

S. Bargmann, P. Steinmann
Modeling and simulation of first and second sound in solids
International Journal of Solids and Structures,
45, 24, 6067-6073, 2008

Rouven Mohr, Andreas Menzel, Paul Steinmann
A consistent time FE-method for large strain elasto-plasto-dynamics
Computer Methods in Applied Mechanics and Engineering,
197, 33-40, 3024-3044, 2008

G. Himpel, A. Menzel, E. Kuhl, P. Steinmann
Time-dependent fibre reorientation of transversely isotropic continua—Finite element formulation and consistent linearization
International Journal for Numerical Methods in Engineering,
73, 10, 1413-1433, 2008

Johannes Utzinger, Martin Bos, Martin Floeck, Andreas Menzel, Ellen Kuhl, Rainer Renz, Klaus Friedrich, Alois K. Schlarb, Paul Steinmann
Computational modelling of thermal impact welded PEEK/steel single lap tensile specimens
Computational Materials Science,
41, 3, 287-296, 2008

Rouven Mohr, Andreas Menzel, Paul Steinmann
Galerkin-based mechanical integrators for finite elastodynamics formulated in principal stretches – Pitfalls and remedies
Computer Methods in Applied Mechanics and Engineering,
197, 49-50, 4444-4466, 2008

A. Menzel, A. Arockiarajan, S. M. Sivakumar
Two models to simulate rate-dependent domain switching effects—application to ferroelastic polycrystalline ceramics
Smart Materials and Structures,
17, 1, 015026, 2008

J. Utzinger, A. Menzel, P. Steinmann, A. Benallal
Aspects of bifurcation in an isotropic elastic continuum with orthotropic inelastic interface
European Journal of Mechanics - A/Solids,
27, 4, 532-547, 2008

A. Menzel, M. Harrysson, M. Ristinmaa
Towards an orientation-distribution-based multi-scale approach for remodelling biological tissues
Comput Methods Biomech Biomed Engin, Computer Methods in Biomechanics and Biomedical Engineering,
11, 5, 505-524, 2008

J. Utzinger, P. Steinmann, A. Menzel
On the simulation of cohesive fatigue effects in grain boundaries of a piezoelectric mesostructure
International Journal of Solids and Structures,
45, 17, 4687-4708, 2008

Johannes Utzinger, Paul Steinmann, Andreas Menzel
Computational modelling of microcracking effects in polycrystalline piezoelectric ceramics
GAMM-Mitteilungen,
31, 2, 151-165, 2008

Frederick Reusch, Christian Hortig, Bob Svendsen
Nonlocal Modeling and Simulation of Ductile Damage and Failure in Metal Matrix Composites
Journal of Engineering Materials and Technology,
130, 2, 021009, 2008

Ralf Denzer, Michael Scherer, Paul Steinmann
An adaptive singular finite element in nonlinear fracture mechanics
Defect and Material Mechanics,
181-190, 2008

Michael Scherer, Ralf Denzer, Paul Steinmann
Energy-based r-adaptivity: a solution strategy and applications to fracture mechanics
Defect and Material Mechanics,
117-132, 2008

B. Kiefer, D. C. Lagoudas
Modeling the Coupled Strain and Magnetization Response of Magnetic Shape Memory Alloys under Magnetomechanical Loading
Journal of Intelligent Material Systems and Structures,
20, 2, 143-170, 2008

Swantje Bargmann, Paul Steinmann
An incremental variational formulation of dissipative and non-dissipative coupled thermoelasticity for solids
Heat and Mass Transfer,
45, 1, 107-116, 2008

S. Bargmann, R. Greve, P. Steinmann
Simulation of cryovolcanism on Saturn’s moon Enceladus with the Green-Naghdi theory of thermoelasticity
Bulletin of Glaciological Research, 26, 23-32, 2008

Thorsten Bartel, Klaus Hackl
A novel approach to the modelling of single-crystalline materials undergoing martensitic phase-transformations
Materials Science and Engineering: A,
481-482, 371-375, 2008

S. Bargmann, R. Denzer, P. Steinmann
On configurational forces within Green–Naghdi thermo-hyperelasticity
Proc. of IUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics, 2008

A. Menzel, J. Utzinger, A. Arockiarajan
Nonlinear piezoelectric effects - towards physics-based computational modelling of micro-cracking, fatigue and switching
Smart Devices: Modeling of Material Systems, 1029, 209-220, 2008

T. Cwiekala, A. Brosius, A. E. Tekkaya, O. Grydin, M. Schaper, F.-W. Bach, C. Barthel, B. Svendsen
Efficient Modelling and Simulation of Process Chains in Sheet Metal Forming and Processing
Steel Research International, 731-737, 2008

K. Jayabal, A. Arockiarajan, S. M. Sivakumar
A micromechanical model for polycrystal ferroelectrics with grain boundary effects
A micromechanical model for polycrystal ferroelectrics with grain boundary effects, 27, 111-124, 2008

Michael Scherer, Ralf Denzer, Paul Steinmann
On a solution strategy for energy-based mesh optimization in finite hyperelastostatics
Computer Methods in Applied Mechanics and Engineering,
197, 6-8, 609-622, 2008

J. Mosler
A novel variational algorithmic formulation for wrinkling at finite strains based on energy minimization: Application to mesh adaption
Computer Methods in Applied Mechanics and Engineering,
197, 9-12, 1131-1146, 2008

B. Kiefer, D. C. Lagoudas
Modeling of the variant reorientation in magnetic shape-memory alloys under complex magnetomechanical loading
Materials Science and Engineering: A,
481-482, 339-342, 2008

Rouven Mohr, Stefan Uhlar, Andreas Menzel, Paul Steinmann
Time-FE Methods for the Nonlinear Dynamics of Constrained Inelastic Systems
IUTAM Symposium on Theoretical, Computational and Modelling Aspects of Inelastic Media,
11, 275-285, 2008

2007

Swantje Bargmann, Paul Steinmann
Classical results for a non-classical theory: remarks on thermodynamic relations in Green–Naghdi thermo-hyperelasticity
Continuum Mechanics and Thermodynamics,
19, 1-2, 59-66, 2007

Peter Herzenstiel, Robin C. Y. Ching, Sarah Ricker, Andreas Menzel, Paul Steinmann, Jan C. Aurich
Interaction of process and machine during high-performance grinding: towards a comprehensive simulation concept
International Journal of Manufacturing Technology and Management,
12, 1/2/3, 155, 2007

A. Arockiarajan, A. Menzel, B. Delibas, W. Seemann
Micromechanical Modeling of Switching Effects in Piezoelectric Materials A Robust Coupled Finite Element Approach
Journal of Intelligent Material Systems and Structures,
18, 9, 983-999, 2007

A. Menzel, P. Steinmann
On configurational forces in multiplicative elastoplasticity
International Journal of Solids and Structures,
44, 13, 4442-4471, 2007

Bernd Kleuter, Andreas Menzel, Paul Steinmann
Generalized parameter identification for finite viscoelasticity
Computer Methods in Applied Mechanics and Engineering,
196, 35-36, 3315-3334, 2007

Christian Hortig, Bob Svendsen
Simulation of chip formation during high-speed cutting
Journal of Materials Processing Technology,
186, 1-3, 66-76, 2007

A. Arockiarajan, A. Menzel, W. Seemann
Constitutive modelling of rate-dependent domain switching effects in ferroelectric and ferroelastic materials
Journal of Electroceramics,
20, 3-4, 159-165, 2007

B. Kiefer, H. E. Karaca, D. C. Lagoudas, I. Karaman
Characterization and modeling of the magnetic field-induced strain and work output in Ni2MnGa magnetic shape memory alloys
Journal of Magnetism and Magnetic Materials,
312, 1, 164-175, 2007

A. Arockiarajan, A. Menzel
On the modelling of rate-dependent domain switching in piezoelectric materials under superimposed stresses
Computer Modeling in Engineering & Sciences, 19, 163-180, 2007

J. Mosler, M. Ortiz
Variational h-adaption in finite deformation elasticity and plasticity
International Journal for Numerical Methods in Engineering,
72, 5, 505-523, 2007

2006

M. Ekh, A. Menzel
Efficient iteration schemes for anisotropic hyperelasto-plasticity
International Journal for Numerical Methods in Engineering,
66, 4, 707-721, 2006

Arunachalakasi Arockiarajan, Buelent Delibas, Andreas Menzel, Wolfgang Seemann
Studies on rate-dependent switching effects of piezoelectric materials using a finite element model
Computational Materials Science,
37, 3, 306-317, 2006

A. Menzel
Relations between material, intermediate and spatial generalized strain measures for anisotropic multiplicative inelasticity
Acta Mechanica,
182, 3-4, 231-252, 2006

A. Arockiarajan, A. Menzel, B. Delibas, W. Seemann
Computational modeling of rate-dependent domain switching in piezoelectric materials
European Journal of Mechanics - A/Solids,
25, 6, 950-964, 2006

E. Kuhl, R. Maas, G. Himpel, A. Menzel
Computational modeling of arterial wall growth
Biomech Model Mechanobiol, Biomechanics and Modeling in Mechanobiology,
6, 5, 321-331, 2006

A. Menzel
A fibre reorientation model for orthotropic multiplicative growth
Biomech Model Mechanobiol, Biomechanics and Modeling in Mechanobiology,
6, 5, 303-320, 2006

S. Bargmann, P. Steinmann
Theoretical and computational aspects of non-classical thermoelasticity
Computer Methods in Applied Mechanics and Engineering,
196, 1-3, 516-527, 2006

J. Mosler
Modeling strong discontinuities at finite strains—A novel numerical implementation
Computer Methods in Applied Mechanics and Engineering,
195, 33-36, 4396-4419, 2006

A. Menzel
Adaptation of biological tissues — a fibre reorientation model for orthotropic multiplicative growth
III European Conference on Computational Mechanics,
271-271, 2006

J. Mosler, M. Ortiz
On the numerical implementation of variational arbitrary Lagrangian–Eulerian (VALE) formulations
International Journal for Numerical Methods in Engineering,
67, 9, 1272-1289, 2006

2005

Harm Askes, Swantje Bargmann, Ellen Kuhl, Paul Steinmann
Structural optimization by simultaneous equilibration of spatial and material forces
Communications in Numerical Methods in Engineering,
21, 8, 433-442, 2005

A. Menzel, M. Ekh, K. Runesson, P. Steinmann
A framework for multiplicative elastoplasticity with kinematic hardening coupled to anisotropic damage
International Journal of Plasticity,
21, 3, 397-434, 2005

A. Menzel, R. Denzer, P. Steinmann
Material forces in computational single-slip crystal-plasticity
Computational Materials Science,
32, 3-4, 446-454, 2005

Göran Johansson, Andreas Menzel, Kenneth Runesson
Modeling of anisotropic inelasticity in pearlitic steel at large strains due to deformation induced substructure evolution
European Journal of Mechanics - A/Solids,
24, 6, 899-918, 2005

A. Menzel, P. Steinmann
A note on material forces in finite inelasticity
Archive of Applied Mechanics,
74, 11-12, 800-807, 2005

B. Kiefer, D. C. Lagoudas
Magnetic field-induced martensitic variant reorientation in magnetic shape memory alloys
Philosophical Magazine,
85, 33-35, 4289-4329, 2005

S. Bargmann, P. Steinmann
Finite element approaches to non-classical heat conduction in solids
Computer Modeling in Engineering & Sciences, 9, 133-150, 2005

G. Himpel, E. Kuhl, A. Menzel, P. Steinmann
Computational modelling of isotropic multiplicative growth
Computer Modeling in Engineering & Sciences, 8, 119-134, 2005

J. Mosler
On advanced solution strategies to overcome locking effects in strong discontinuity approaches
International Journal for Numerical Methods in Engineering,
63, 9, 1313-1341, 2005

J. Mosler
A novel algorithmic framework for the numerical implementation of locally embedded strong discontinuities
Computer Methods in Applied Mechanics and Engineering,
194, 45-47, 4731-4757, 2005

J. Mosler
On the efficient implementation of an elastoplastic damage model for large-scale analyses of material failure: a multiscale approach
Computers & Structures,
83, 4-5, 369-382, 2005

J. Mosler
Numerical analyses of discontinuous material bifurcation: strong and weak discontinuities
Computer Methods in Applied Mechanics and Engineering,
194, 9-11, 979-1000, 2005

2004

A. Menzel, R. Denzer, P. Steinmann
On the comparison of two approaches to compute material forces for inelastic materials. Application to single-slip crystal-plasticity
Computer Methods in Applied Mechanics and Engineering,
193, 48-51, 5411-5428, 2004

Ellen Kuhl, Ralf Denzer, Franz Josef Barth, Paul Steinmann
Application of the material force method to thermo-hyperelasticity
Computer Methods in Applied Mechanics and Engineering,
193, 30-32, 3303-3325, 2004

A. Menzel, P. Betsch, E. Stein, P. Steinmann
Konzepte der Numerik endlicher Rotationen
Technische Mechanik, 24, 1, 61-66, 2004

A. Menzel
Modelling of anisotropic growth in biological tissues
Biomech Model Mechanobiol, Biomechanics and Modeling in Mechanobiology,
3, 3, 147-171, 2004

J. Mosler
On the modeling of highly localized deformations induced by material failure: The strong discontinuity approach
Archives of Computational Methods in Engineering,
11, 4, 389-446, 2004

J. Mosler, G. Meschke
Embedded crack vs. smeared crack models: a comparison of elementwise discontinuous crack path approaches with emphasis on mesh bias
Computer Methods in Applied Mechanics and Engineering,
193, 30-32, 3351-3375, 2004

J. Mosler, O. T. Bruhns
A 3D anisotropic elastoplastic-damage model using discontinuous displacement fields
International Journal for Numerical Methods in Engineering,
60, 5, 923-948, 2004

2003

A. Menzel, P. Steinmann
A view on anisotropic finite hyper-elasticity
European Journal of Mechanics - A/Solids,
22, 1, 71-87, 2003

A. Menzel, P. Steinmann
On the spatial formulation of anisotropic multiplicative elasto-plasticity
Computer Methods in Applied Mechanics and Engineering,
192, 31-32, 3431-3470, 2003

A. Menzel, P. Steinmann
Geometrically non-linear anisotropic inelasticity based on fictitious configurations: Application to the coupling of continuum damage and multiplicative elasto-plasticity
International Journal for Numerical Methods in Engineering,
56, 14, 2233-2266, 2003

Tina Liebe, Andreas Menzel, Paul Steinmann
Theory and numerics of geometrically non-linear gradient plasticity
International Journal of Engineering Science,
41, 13-14, 1603-1629, 2003

M. Ekh, A. Menzel, K. Runesson, P. Steinmann
Anisotropic damage with the MCR effect coupled to plasticity
International Journal of Engineering Science,
41, 13-14, 1535-1551, 2003

Ralf Denzer, Franz Josef Barth, Paul Steinmann
Studies in elastic fracture mechanics based on the material force method
International Journal for Numerical Methods in Engineering,
58, 12, 1817-1835, 2003

E. Kuhl, A. Menzel, P. Steinmann
Computational modeling of growth
Computational Mechanics,
32, 1-2, 71-88, 2003

J. Mosler, G. Meschke
3D modelling of strong discontinuities in elastoplastic solids: fixed and rotating localization formulations
International Journal for Numerical Methods in Engineering,
57, 11, 1553-1576, 2003

2002

A. Menzel, M. Ekh, P. Steinmann, K. Runesson
Anisotropic damage coupled to plasticity: Modelling based on the effective configuration concept
International Journal for Numerical Methods in Engineering,
54, 10, 1409-1430, 2002

2001

A. Menzel, P. Steinmann
A theoretical and computational framework for anisotropic continuum damage mechanics at large strains
International Journal of Solids and Structures,
38, 52, 9505-9523, 2001

A. Menzel, P. Steinmann
On the comparison of two strategies to formulate orthotropic hyperelasticity
Journal of Elasticity,
62, 3, 171-201, 2001

A. Menzel, P. Steinmann
On the theory and computation of anisotropic damage at large strains
Revue européenne des éléments finis, 10, 369-383, 2001

2000

A. Menzel, P. Steinmann
On the continuum formulation of higher gradient plasticity for single and polycrystals
Journal of the Mechanics and Physics of Solids,
48, 8, 1777-1796, 2000

T. Daxner, H. J. Böhm, F. G. Ramerstorfer, R. Denzer, M. Maier
Simulation des elasto-plastischen Verhaltens von Metallschaum mit Hilfe von 2D und 3D Einheitszellen-Modellen
Materialwissenschaft und Werkstofftechnik,
31, 6, 447-450, 2000

1998

A. Menzel, P. Steinmann
On the formulation of higher gradient single and polycrystal plasticity
Le Journal de Physique IV,
08, PR8, Pr8-239-Pr8-247, 1998

P. Betsch, A. Menzel, E. Stein
On the parametrization of finite rotations in computational mechanics: A classification of concepts with application to smooth shells
Computer Methods in Applied Mechanics and Engineering,
155, 3-4, 273-305, 1998

A. Menzel, P. Betsch, E. Stein, P. Steinmann
Zur Formulierung und Numerik der Statik und Dynamik von Schalen bei endlichen Deformationen
Bauingenieur, 73, 283-291, 1998