Sprungmarken

Servicenavigation

Hauptnavigation

Sie sind hier:

Hauptinhalt

Jun. Prof. Dr.-Ing. habil. Sandra Klinge

Jun. Prof. Dr.-Ing. habil. Sandra Klinge Foto von Jun. Prof. Dr.-Ing. habil. Sandra Klinge

Telefon
+49 231 755-5790

Fax
+49 231 755-2688

Sprechzeiten
by appointment

Adresse

Institute of Mechanics

Department of Mechanical Engineering

TU Dortmund

Leonhard-Euler-Str. 5

D-44227 Dortmund

Raum 140

Inhalt

Theory of homogenization

The main topic of the research work is concerned with the theory of homogenization and its application to statistically uniform materials, a group of materials for which a so-called representative volume element (RVE) can be defined. The approach is based on the idea of defining micro- and macro boundary value problems (BVP) which are related to each other by using the principle of the volume average and the Hill-Mandel macrohomogeneity condition. The latter requires the equality of the macrowork with the volume average of the microwork and is used to define the boundary conditions for the RVE.

Inverse FE2 analysis

In many cases, the microstructure of composite materials is not known and cannot directly be accessed such that an inverse analysis is necessary for its investigation. This approach requires the implementation of two tools: an optimization method for the minimization of the error problem and a mechanical approach for the solution of the direct problem, i.e. the simulation of composite materials. One particular choice deals with the combination of the Levenberg–Marquardt method with the multiscale finite element method. The typical examples in this field investigate the elastic parameters for multi-phase materials. The sensitivity with respect to the initial guess and the influence of the measurement error are common problems to determine a unique solution.

Simulation of metal forming processes based on the multiscale material modeling

Current trends towards lightweight design and the production of individualized and functionalized components often lead to multi-material products that combine several materials. For some material combinations, fusion welding processes are not applicable due to the fact that the materials to be joined have largely different melting points or will show metallurgical reactions that are detrimental for the product properties. Metallic multi-material products can be joined by plastic deformation in these cases. Examples of joining-by-forming processes are roll-bonding and friction-welding. In such processes, interdiffusion, evolution of the interface properties and microstructure evolution of both contacting solid bodies by plastic deformation, recovery, recrystallization, grain growth and phase transformations may take place concurrently and with strong interaction of the individual processes. The roll bonding of copper-aluminum composites deserves special attention because of the radically different behavior of the component materials: whereas DRX is typical of Cu, the dynamic recovery occurs in Al. Such Cu-Al-claddings are used in conductor wires and joints for conductor wires. Replacing copper partly by aluminum offers various advantages such as high conductivity at a lower weight and cost compared to monolithic copper.

Modeling of polymers

This working field deals with a continuum mechanical model for the curing of polymers, including the incompressibility effects arising at the late stages of the process. For this purpose, the free energy density functional is split into a deviatoric and a volumetric part, and a multifield formulation is inserted. An integral formulation of the functional is used to depict the time-dependent material behavior. In addition, the attention is paid to  the modeling of viscoelastic and shrinkage effects. For the modeling of viscous effects, the deformation at the microlevel is decomposed into an elastic and a viscoelastic part, and a corresponding energy density consisting of equilibrium and non-equilibrium parts is proposed.  In contrast to the viscous effects, the modeling of shrinkage effects does not require any further extension of the expression for the energy density, but an additional decomposition of the deformation into a shrinkage and a mechanical part. The model is also coupled with the multiscale finite element method in order to simulate the behavior of reinforced polymers.

Modeling of diffusion processes at the boundary of crystals

The solution-precipitation creep is believed to be the leading deformation process in the subduction zone, and thus responsible for plate tectonics. The process shows similarities to the Coble creep with the difference that the material transport takes place in intercrystalline space and not along the boundary of crystals. For its modeling, a variational  approach has been devised in which the elastic energy remains in the standard form but a novel, specific formulation of the dissipation functional is proposed.

Modeling of wave propagation through fluids and elastic solids

In this research field, the focus is on the harmonic excitation and modeling of viscous effects. For this purpose, a formulation in the complex domain is assumed. This approach is illustrated on the basis of the modeling of the cancellous bone and the investigation of the process of osteoporosis. The cancellous bone is a specific tissue consisting of the solid skeleton and the fluid marrow for whose laboratory investigation ultrasonic procedures are typically used. These experiments are also subjects of simulations, particularly applied to calculate the attenuation coefficient which depends on the bone density.

Software - Multiscale FE program MSFEAP

As the main result of the work on the above topics, the multiscale FE program MSFEAP has been written. This program uses the FE program FEAPpv ( Robert L. Taylor , University of California, Berkeley) as a basis. Its extension, the MSFEAP program, is suitable for simulating heterogeneous materials. The user interface and commands specific to the original program remain unchanged with the difference that the commands can be applied at two levels. A further extension of the program by implementing new elements is easily possible due to its modular structure. In order to clarify the basics of the homogenization theory and the application of the program, a user manual including characteristic examples is compiled. The complete input files for the described problems are also provided.


Current Projects

D-A-CH Project (DFG, FWF) - Computational Modeling of Vesicle-Mediated Cell Transport  (CM-TransCell)
(Start: March 2018)
PIs: S. Klinge and G. A. Holzapfel
Coworkers: T. Wiegold and D. Haspinger

The particularly important characteristics of eukaryotic cells are the enormous complexity of their membrane anatomy and the high level of organization of the transport processes. The surprisingly precise manner of the routing of vesicles to various intracellular and extracellular destinations can be illustrated by numerous examples such as the release of neurotransmitters into the presynaptic region of a nerve cell and the export of insulin to the cell surface.

The key idea of the present project is to couple results of biomedical investigations and mechano-mathematical models with the highly efficient engineering software packages in order to simulate this type of processes, in particular the vesicle transport. The results should bridge the theoretical investigations and medical praxis and shift the paradigm in understanding and remedying different diseases, which certainly is the primary and long-term goal of the project. The individual objectives coincide with the modeling of single aspects of the vesicle transport, namely with the simulation of mechanisms by which the vesicles form, find their correct destination, fuse with organelles and deliver their cargo. The application of several different approaches is envisaged for this purpose, but three main strategies build the underlying skeleton: the theory of lipid bilayer membranes, the homogenization method and the diffusion theory. The mentioned approaches will furthermore be combined with the modern numerical techniques such as the finite element method and the multiscale finite element method.

In the final stage, the realization of single objectives will allow the simulation of vesicle transport as a continuous process and the study of the impact of various factors on the whole process. This way, the project will yield a significant shift from "static" bio-computations related to the single cell compartments and substeps of its activities, to the "dynamic" simulation of the real living processes.

DFG Project  - Multiscale Modeling of Strain-Induced Crystallization in Polymers  (MM-SIC)
(Start: February 2017)
PI: S. Klinge
Coworker: S. Aygün

The present project treats a polymer affected by the strain induced crystallization (SIC) as a heterogeneous medium consisting of regions with the different degree of network regularity. Such a concept allows depicting the nucleation and the growth of crystalline regions as well as the change of effective material parameters depending on the level of the strain applied. The model proposed is thermodynamically consistent. It is based on the assumptions for the free Helmholtz energy and dissipation. Both of them primarily include bulk- and surface terms due to the deformation and crystallization. The external variables are deformations and temperature, whereas the inelastic deformations and degree of the network regularity are internal variables. Their evolution equations are derived according to the principle of maximum of dissipation. The influences of latent heat and of temperature change are implemented in order to simulate thermal effects. The explained framework is advantageous for several reasons. First, it is suitable to answer the crucial question of which process predominantly influences SIC: the nucleation of new crystalline regions or the growth of already existing ones. Secondly, the proposed model is ideal for a direct implementation within the standard multiscale finite element concept. This numerical homogenization procedure is compatible with the theory of finite strains and is applicable for modeling the cases where the ratio of characteristic lengths of scales tends to zero. Both of these features are necessary for the effective modeling of SIC. The project also includes a study of stochastic aspects of the process, where a distribution function for the observable variables is introduced to express the expectation value of relevant quantities. The necessary evolution equation is derived by considering the effective energy of a control volume. The main goals here are to study nucleation and to evaluate the average size of the regions with different regularities of the network. The solution of the tasks itemized will make it possible to achieve the final project goal: the advanced simulations of SIC which can significantly contribute to the more efficient designing and usage of polymers. This is especially motivated by the fact that SIC has to be understood as a kind of reinforcement already successfully applied for some rubber materials. The proposed concepts are of general nature and can be taken as a basis for the modeling of similar processes involving the evolution of the internal microstructure. 

TRR 188 - Damage Controlled Forming Processes

Subproject C04 - Micromechanical modelling of damage in polycrystals on the basis of the extended crystal plasticity

(Start: January 2017)

PIs: S. Klinge and J. Mosler

The objective of subproject C04 is the development of a micromechanical model for polycrystals which shall be able to consistently simulate plastic deformations together with damage. To this end, an extended crystal plasticity model able to simulate the damage within single crystals is proposed. It is furthermore combined with an interface model in order to additionally capture influences of damage on the grain boundaries. Finally, both material models are applied in order to simulate the behavior of an appropriately chosen RVE and to study the influence of initial damage.


List of publications


Publications in journals (reviewed)


Publications in journals (reviewed) – In preparation/submitted

  • S. Aygün, T. Wiegold, S. Klinge, R. P. Gilbert and G. A. Holzapfel
    Viscoelasticity of Cross-Linked Actin Network Embedded in Cytosol,
    (Int. J. Num. Meth. Biomed. Eng.)
  • S. Klinge, S. Aygün and M. Bambach
    Continuum-Mechanical Aspects of Modeling the Dislocation Motion Including the Effects of Chemical Impurities,
    (Int. J. Solid. Struct)
  • T. Wiegold, S. Klinge, R. P. Gilbert and G. A. Holzapfel
    The Influence of Binder Mobility to the Viral Entry Driven by the Receptor Diffusion,
    (Int. J. Num. Meth. Biomed. Eng.)


Publications in journals

  • S. Aygün and S. Klinge, 2017
    Multiscale Modeling of Strain-Induced Crystallization in Polymers,
    PAMM, 17, 389-390
  • M. Bambach and S. Klinge, 2017
    Consistency of Dynamic Recrystallization Models from the Perspective of Physical Metallurgy and Continuum Mechanics,
    PAMM, 17, 395-396
  • S. Klinge, T. Wiegold, G. A. Holzapfel and R. P. Gilbert, 2017
    The Influence of Binder Mobility to the Viral Entry Driven by the Receptor Diffusion,
    PAMM, 17, 197-198
  • S. Klinge, S. Aygün, J. Mosler and G. A. Holzapfel, 2016
    Cross-linked Actin Networks: Micro- and Macroscopic Effects,
    PAMM, 16(1), 93-94
  • S. Klinge and P. Steinmann, 2015
    Determination of Material Parameters Corresponding to Viscoelastic Curing Polymers,
    PAMM, 15(1), 315-316
  • S. Klinge and A. Bartels and K. Hackl and P. Steinmann, 2012
    Viscoelastic Effects and Shrinkage as the Accompanying Phenomena of the Curing of Polymers. Single- and Multiscale Effects,
    PAMM, 12(1), 435-436
  • A. Bartels and S. Klinge and K. Hackl and P. Steinmann, 2012
    Single and Multiscale Aspects of the Modeling of Curing Polymers,
    PAMM, 12(1), 303-304
  • C. Günther, S. Ilic and K. Hackl, 2011
    Application of the Green Tensor to the Modeling of Solution-Precipitation Creep,
    PAMM, 11, 375-376
  • S. Ilic and K. Hackl, 2009
    Simulation of Diffusional Processes from the Microscopic and Macroscopic Point of View,
    PAMM, 9, 429-430
  • S. Ilic, K. Hackl and R. P. Gilbert, 2008
    Effective Material Parameters of Bone,
    PAMM, 8, 10175-10176
  • S. Ilic, K. Hackl and R. P. Gilbert, 2007
    Estimation of Material Properties of Cancellous Bone Using Multiscale FEM,
    PAMM, 7, 4020015-4020016
  • S. Ilic and K. Hackl, 2006
    Multiscale FEM in Modelling of Solution-precipitation Creep,
    PAMM, 6, 483-484
  • S. Ilic and K. Hackl, 2005
    Solution-precipitation Creep – Micromechanical Modelling and Numerical Results,
    PAMM, 5, 277-278
  • S. Ilic and K. Hackl, 2004
    Homogenisation of Random Composite Via the Multiscale Finite Element Method,
    PAMM, 4, 326-327


Publications in journals – In preparation/submitted

  • S. Aygün and S. Klinge, 2018
    Study of the Microstructure Evolution Caused by the Strain-Induced Crystallization in Polymers,
    (PAMM, submitted)
  • S. Klinge, S. Aygün, M. Bambach, 2018
    Continuum-Mechanical Aspects of Modeling the Dislocation Motion Including the Effects of Chemical Impurities,
    (PAMM, submitted)
  • T. Wiegold, S. Klinge, S. Aygün, R. P. Gilbert, G. A. Holzapfel, 2018
    Viscoelasticity of Cross-Linked Actin Network Embedded in Cytosol,
    (PAMM, submitted)


Contributions in books and in proceeding books

  • M. Awd, S. Siddique, J. Johannsen, T. Wiegold, S. Klinge, C. Emmelmann, F. Walther, 2018
    Quality assurance of additively manufactured alloys for aerospace industry by non-destructive testing and numerical modeling,
    Proceedings of the 10th International Conference on Non-destructive Testing in Aero-space (2018) 1-10
  • R.P. Gilbert, A. Vasilic and S. Ilic, 2011
    Homogenization Theories and Inverse Problems, Bone Quantitative Ultrasound
    P. Laugier and G. Haiat (Eds.), Springer, 229-264
  • S. Ilic and K. Hackl, 2010
    Inverse Problems in the Modelling of Composite Materials, Proceedings of the Seventh International Conference on Engineering Computational Technology (ECT)
    B.H.V. Topping, J.M.Adam, F.J. Pallares, R. Bru and M.L. Romero (Eds.), Civil-Comp Press, Stirlingshire, Scotland, Paper 122
  • R.P. Gilbert, K. Hackl and S. Ilic, 2010
    Investigation of the Acoustic Properties of the Cancellous Bone, Progress in Analysis and its Applications,
    M. Ruzhansky and J. Wirth (Eds.), World Scientific, 570-577
  • S. Ilic and K. Hackl, 2010
    Solution-precipitation Creep - Extended FE Implementation, Variational Concepts with Application to the Mechanics of Materials,
    Springer, 105-116
  • K. Hackl, S. Ilic and R. P. Gilbert, 2009
    Multiscale Modeling for Cancellous Bone by Using Shell Elements, Shell Structures: Theory and Applications,
    W. Pietrasckiewicz and I. Kreja (Eds.), Taylor & Francis Group CRC Press, 249-252
  • S. Ilic and K. Hackl, 2007
    Application of the Multiscale FEM to the Modeling of Heterogeneous Materials, Proceedings of the first Seminar on the Mechanics of Multifunctional Materials,
    J. Schröder and D. Lupascu and D. Balzani (Eds.), University of Duisburg-Essen, 47-51